Sony DSC-D700 Service Manual page 74

1. Start of focus adjustment
Inhibit the zoom tracking and detect the origin by this operation.
p00 f00 d0010 EXECUTE
1) Set Page to 0.
2) Set Function to 0.
3) Set Data to 10.
4) Execute.
2. Wide-angle position adjustment
Wide-angle standard position is measured by this operation.
p00 f00 d0011 EXECUTE
1) Put together white frame displayed on the screen with the center of siemens
star chart. (telephoto position to wide-angle position)
2) Set the zoom manually to the wide-angle position.
3) Set Page to 0.
4) Set Function to 0.
5) Set Data to 11.
6) Execute.
3. Telephoto position adjustment
Telephoto standard point is measured by this operation.
p00 f00 d0012 EXECUTE
1) Set the zoom manually to the telephoto position.
2) Set Page to 0.
3) Set Function to 0.
4) Set Data to 12.
5) Execute.
4. Completion of focus adjustment
Store the adjustment result in EEPROM.
Permit the zoom tracking.
p00 f00 d0013 EXECUTE
1) Set Page to 0.
2) Set Function to 0.
3) Set Data to 13.
4) Execute.
3. Iris Adjustment
Subject: Not required.
1) Iris adjustment
Threshold value of iris reset output voltage is measured by this operation.
p00 f00 d0014 EXECUTE
1) Set Page to 0.
2) Set Function to 0.
3) Set Data to 14.
4) Execute.
3-4 DSC-D700 (UC,CE)