Sony DSC-D700 Service Manual page 28

8
8
EV
ISO
AE-LOCK
9
R-REVIEW
Viewing the Picture Index
1
1 3
AE-LOCK
R-REVIEW
•OFF DISP INDEX LCD
•CAM
•PLAY
MENU
•OFF
EXCUTE
•CAM
EXIT
•PLAY
2
4
42 GB
To end automatic playback, press the release
button halfway.
Automatic playback ends and the image
appearing when you pressed the release button is
displayed.
Turn the power/mode dial to OFF to turn the
camera off.
Note
When the camera is set to automatic playback, the
Auto Power Off function does not work.
While pressing the mode lock (green), turn the
power/mode dial to PLAY.
The access lamp lights and the camera reads the
last recorded picture.
Reading is finished when the access lamp goes
out, and the picture is played back.
Press the INDEX button.
The LCD monitor display switches to index view.
INDEX
INDEX
3
Rotate the shift dial to select a picture.
The color of the picture you have chosen changes
and information about that picture, such as date
and exposure, is displayed.
Note
In Index Mode, when you rotate the shift dial
while holding down the shift button, you can
jump ten frames to choose a picture.
When you rotate the shift dial while holding down
the shift button and the release button
simultaneously, you can jump 50 frames to
choose a picture.
4
To close index view, press the INDEX button
again.
The pictures that you selected are played back one
at a time.
5
Turn the power/mode dial to OFF to turn the
5
power off.
•OFF
•CAM
•PLAY
Note
MENU
If the camera is on but not operated for about
EXCUTE
three minutes, the LCD monitor shuts off
(Standby Mode). Also, if the camera is not
EXIT
operated for approximately another two minutes,
the camera shuts off completely. In Standby
Mode you can return to the playback condition by
touching any button, dial or switch on the camera.
When the camera has shut itself completely off,
you can return to the playback condition by
pressing the release button.
43 GB