Sony DSC-D700 Service Manual page 113

5. When no picture can be recorded on a PC card in the CAM mode
(The EE picture of a camera is normal.)
START
Are connectors on FP-10 board
firmly inserted into connectors on SY-264
and IF-717 boards?
YES
Is operation normal
after replacement of
SY-264 board?
YES
. Defective operation of card I/F block
IC002 on the SY-264 board
→ Replace the SY-264 board.
* The adjustment after board replacement
must be performed.
END
DSC-D700 (UC,CE)
. Insert the connectors again.
NO
. Defective soldering of PC card connector CN703 on
the IF-717 board
NO
4-25