Troubleshooting Tips - Watchguard Firebox SOHO 6 Wireless User Manual

12 Click to select the Encapsulation (ESP) checkbox and then
select a value for the Encrypt Alg and Hash Alg drop lists.
13 Select DES from the Encrypt Alg drop list and select MD5
from the Hash Alg drop list.
14 Select Tunnel from the Encapsulation drop list.
This is the default setting.
15 Verify that the Authentication Protocol (AH) checkbox is not
selected.
16 Once you have finished, select File => Save or click the
button.

Troubleshooting Tips

WatchGuard maintains a knowledge base on our Web site,
including an In-Depth FAQ section on configuring and using the
MUVPN client. This is available at:
A few of the most common issues found in installing, configuring,
and using the MUVPN client are described below.
My computer is hung up just after installing the
MUVPN client...
This is most likely due to either the ZoneAlarm personal firewall
application interfering with regular Local network traffic or it is
because the MUVPN client is active and is unsuccessfully
attempting to create VPN tunnels.
When the MUVPN client is not in use, ZoneAlarm should be
shutdown and the client deactivated.
User Guide
www.watchguard.com/support
Troubleshooting Tips
167