Set Up Vpn Manager Access - Watchguard Firebox SOHO 6 Wireless User Manual

Networking or directly through a local area network (LAN) or
wide area network (WAN).
From the Windows desktop system tray:
10 Verify the MUVPN client status–it must be activated. If it is
not, right-click the icon and select Activate Security Policy.
For information on how to determine the status of the MUVPN icon, see
Chapter 11, "The Mobile User VPN client icon" on page 148.
Then, from the Windows desktop system tray:
11 Right-click the icon and select Connect.
The WatchGuard Mobile User Connect widow appears.
12 Click the Yes button.
13 Finally, enter the IP address of the external network in your
browser window to connect to the System Status page of the
SOHO 6 Wireless.

Set up VPN manager access

The VPN Manager Access page configures the SOHO 6 Wireless to
allow remote configuration of the SOHO 6 Wireless by the
WatchGuard VPN Manager software. The WatchGuard VPN
Manager software configures and manages VPN tunnels.
The VPN Manager software is a separate product and must run on
a WatchGuard Firebox II/III. Additional information about the
VPN Manager product is available on the WatchGuard Web site:
https://www.watchguard.com/products/vpnmanager.asp
Follow these instructions to configure VPN Manager access:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
User Guide
Set up VPN manager access
63