Watchguard Firebox SOHO 6 Wireless User Manual page 57

Hide thumbs Also See for Firebox SOHO 6 Wireless:
Table of Contents

Advertisement

The SOHO 6 Wireless requires 30 seconds to reboot. The Mode indicator
on the front of the SOHO 6 Wireless will go off and then come on.
1
Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
2
Click Reboot.
or
2
Disconnect and reconnect the power supply.
To reboot a SOHO 6 Wireless located on a remote system, use one
of these methods:
The remote SOHO 6 Wireless must be configured to allow incoming
HTTP (Web) or FTP traffic from the Internet. See "Configure incoming
and outgoing services" on page 71 for information about how to
configure a SOHO 6 Wireless to receive incoming traffic.
3
Type the external network IP address of the remote SOHO 6
Wireless in your browser window to connect to the System
Status page of the remote SOHO 6 Wireless.
4
Click Reboot.
or
4
Send an FTP command to the remote SOHO 6 Wireless. Use an
FTP program to connect to the remote SOHO 6 Wireless, and
enter the command:
quote rebt
User Guide
Reboot the SOHO 6 Wireless
N
OTE
N
OTE
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Firebox soho 6tc wirelessBf4s16e5w

Table of Contents