Application Three: Two Psm200 Wireless Systems Used Simultaneously; Rack Mounting The P2T - Shure PSM 200 User Manual

APPLICATION THREE: Two PSM200 Wireless Systems Used Simultaneously*

The following configuration uses two PSM200 systems simultaneously, and utilizes the SPLIT OUT feature of the TransMixer. In this exam-
ple, the musicians keep the TranMixers on stage with them, in order to control their personal mixes independent of the house engineer.
1. Connect the vocal mic to INPUT 1 of the Vocal Mix TransMixer and connect SPLIT OUT 1 (the vocals) to the
Mixing Console.
2. Connect the total band mix from the Mixing Console to INPUT 2 of the Vocal Mix TransMixer.
NOTE: In this example, the band mix includes vocals. This allows the guitar mix to include vocals,
and allows the vocalist to independently control more of the vocal level in his/her personal mix.
3. Set the Vocal Mix P2T and P2R Receiver to the same frequency channel.
4. Connect SPLIT OUT 2 of the Vocal Mix TransMixer (the band mix) to INPUT 1 of the Guitar Mix TransMixer.
5. Connect the guitar amp simulator to INPUT 2 of the Guitar Mix P2T TransMixer.
6. Connect the SPLIT OUT 2 of the Guitar Mix TransMixer (the guitar amp simulator) to the Mixing Console.
7. Set the Guitar Mix P2T TransMixer and P2R Receiver to a frequency channel that's different from the channel you
set for the Vocal Mix system in step 3.
* Up to four systems can be used at the same time.
Vocal Mic
SPLIT OUT
from
TransMixer

RACK MOUNTING THE P2T

The P2T features a standard
WARNING: Do not torque the screws too tightly, or the chassis may be damaged.
Install Rack Ears
Single Unit
PSM200 TransMixer
MIC/LINE 1 MIC/LINE 2 1 INPUTS 2 CHANNEL SELECT
Mount in an Equipment Rack
PSM200 TransMixer
MIC/LINE 1 MIC/LINE 2 1 INPUTS 2 CHANNEL SELECT
SPLIT OUT
TransMixer
Vocal Mix
Band Mix
Vocal
Mic
Vocal Mixing Console
Mix
1
/ –rack space design, and includes a rack mounting kit.
2
ENGLISH
Band Mix
Guitar Mix
from
Dual–Mounting Two Units
MIC/LINE 1 MIC/LINE 2 1
MIC/LINE 1 1 INPUTS 2
MIC/LINE 2
NOTE: Be sure to use both straddle bars when installing dual units.
11
Guitar Amp
Simulator
Guitar
Mix
PSM200 TransMixer PSM200 TransMixer
INPUTS2 CHANNEL SELECT MIC/LINE 1 MIC/LINE 2 1 INPUTS2 CHANNEL SELECT
PSM200 TransMixer PSM200 TransMixer
CHANNEL SELECT MIC/LINE 1 MIC/LINE 2 1 INPUTS 2 CHANNEL SELECT
Guitar Amp
Simulator
SPLIT OUT
from
TransMixer