Initializing The System - Radio Shack Two-Line Caller ID Phone With Speakerphone Owner's Manual

43-935.fm Page 13 Friday, January 14, 2000 3:07 PM
3. When you hear the dial tone, press
any number other than
Note: If your phone system requires
that you dial an access code (9, for
example) before you dial an outside
number, do not press the access
code number.
• If the dial tone stops , you have
touch-tone service. Leave
set to
PULSE TONE
• If the dial tone continues , you
have pulse service. Set
to
PULSE PULSE
INITIALIZING THE
SYSTEM
Before you use the phone the first time
or any time you need to reset the
phone's clock, use a pointed object,
such as a straightened paper clip, to
press . 12:00 AM appears on the
RESET
display.
Notes:
• The telephone company sends the
correct time with each incoming call,
so the correct date and time are au-
tomatically set when the phone re-
ceives its first call.
• If the system does not work after
you initialize it, remove the batteries,
disconnect the system from the
phone line and the AC outlet, re-
.
0
/
TONE
.
/
TONE
.
place the batteries with fresh ones,
then reconnect it and try initializing it
again.
13