Using Redial; Using Mute; Using Flash; Using Tone Services Ona Pulse Line - Radio Shack ET-1101 Owner's Manual

43-1101.fm Page 12 Friday, July 9, 1999 9:32 AM

USING REDIAL

To quickly redial the last number dialed,
press then
TALK REDIAL
Notes:
• The redial memory holds up to 32
digits, so you can redial long-distance
as well as local numbers.
• The redial memory can also store
tone entries (see "Using Tone Ser-
vices On a Pulse Line") and pause
entries (see "Entering a Pause in a
Memory Number" on Page 15).

USING MUTE

To talk to someone else in the room with-
out the person on the other end of the
phone line hearing your conversation,
press .
MUTE
MUTE
Press again to resume your phone
MUTE
conversation.
12

USING FLASH

FLASH
. of a switchhook signal for special phone
services such as Call Waiting.
For example, if you have Call Waiting,
press
without disconnecting the current call.
Press
call.
Note: If you do not have any special
phone services, pressing
disconnect your current call.
USING TONE SERVICES ON
A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these tone
services by following these steps.
1. Dial the service's main number.
provides the electronic equivalent
TONE
FLASH
to answer an incoming call
FLASH
again to return to the first
FLASH
might
FLASH