Installing A Belt Clip; Using A Headset - Radio Shack 43-5829 User Manual

2.4 ghz multi-handset expandable cordless telephone with digital answerer
Hide thumbs Also See for 43-5829:
Table of Contents

Advertisement

The Basics
WARNING: Dispose of the old battery pack
promptly and properly.
Do not burn or bury it. Dispose of used batteries
according to the instructions.
Danger! Risk of explosion if battery is replaced
by an incorrect type.

Installing a Belt Clip

To attach the belt clip
Insert the belt clip into the holes on each side of the
handset. Press down until it clicks.
To remove the belt clip
Pull either side of the belt clip to release the tabs from
the holes.

Using a Headset

You can make or answer calls handsfree using an
optional headset that has a
RadioShack has a variety of headsets available.
1.
To connect the headset, gently fl ip open the
rubber headset jack cover on the side of the
handset. Then insert the headset's plug into
the jack.
Use the VOL/RING/ or VOL/RING/ on the
2.
handset to adjust the headset's volume.
3.
With a headset connected, you can make or
answer calls as usual using the keys on the
handset.
/
-inch (2.5-mm) plug.
3
32
25

Advertisement

Table of Contents
loading

Table of Contents