Table of Contents
Advertisement
Beyond the Basics
Operating the Answering
System While You Are Away
from Home
You can access your answering system while you
are away from home to check, play, and delete
messages, or even record a new greeting message or
turn your answering system on and off.
To operate from a remote location, use any touch-
tone telephone, and follow these steps:
1.
Call your telephone number and wait for the
system to answer. If the answering system is off,
it will answer after about 10 rings and sounds a
series of beeps.
2.
During the greeting or the beeps (if answering
system is off), press 0 and enter your security
code/PIN within two seconds (see Setting a
Security Code or Personal Identifi cation Number
(PIN) on page 86).
3.
The answering system announces the current
time and the number of messages stored in
memory. You hear "To play incoming messages,
press zero-two. For help, press one-zero"
followed by a beep.
4.
Enter a remote command from the chart below.
You have 15 seconds to enter the fi rst command;
after the fi rst command, you have two seconds to
enter each command.
97
Advertisement
Table of Contents
