Turning Auto Talk On/Off; Turning Caller Id/Call Waiting On/Off; Storing Your Area Code - Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Dual Caller ID Owner's Manual

the handset also rings (unless you set the
handset's ringer to off).
TURNING AUTO TALK ON/
OFF
Your phone is preset so you must press
when you lift the handset from the base
TALK
to answer a call. With auto talk turned on,
you can answer a call by just lifting the hand-
set from the base. If the handset is away
from the base, you can answer by pressing
any key.
Follow these steps to turn auto talk on or off.
1. Lift the handset and press
7kje JWba 7kje 7kje 7kje
menu appears with
2. Press
SELECT/INTCM
Ed Ed Ed Ed E\\ E\\ E\\ E\\
talk setting. or
the selected setting.
3. Return the handset to the base or press
to store the new setting.
MENU
TURNING CALLER ID/CALL
WAITING ON/OFF
If you subscribe to Call Waiting with Caller ID
service, you can set the phone to show Call-
er ID information for an incoming call even
while you are using the phone.
Follow these steps to turn the Caller ID/Call
Waiting feature on or off.
1. Lift the handset and press
7kje JWba 7kje
7kje 7kje
menu appears with
2. Press or
2 VOL/CID
(Caller ID/Call Waiting).
3. Press
SELECT/INTCM
Caller ID/Call Waiting setting.
Efj Efj
Efj Efj
appears.
4. Press then return the handset to
MENU
the base to store the new setting.
With the Opt setting, you can use the ad-
vanced Caller ID/Call Waiting options. See
"Call Waiting Options Service" on Page 21.
STORING YOUR AREA
CODE
You can store your local area code in the
phone's Caller ID record so it does not show
the area code if the received call is from your
local area. If for some reason you need to
dial the area code (or store in the memory),
you can add it afterwards. See "Adding/De-
leting the Area Code" on Page 23.
Note: If your calling area requires 10-digit di-
. A
MENU
aling including area code, do not enter the
JWba JWba JWba
selected.
area code but leave this option blank.
to change the auto
Follow these steps to store your area code.
appears indicating
. A
MENU
JWba
JWba JWba
selected.
9 9 9 9
9?:9M 9?:9M
9?:9M 9?:9M
to select
to change the
Ed Ed Ed Ed E\\ E\\ E\\ E\\
, , or
Installation
1. Lift the handset and press
9 9 9 9
2. Press or
3 VOL/CID
7h[W 9eZ[ 7h[W 7h[W 7h[W 9eZ[ 9eZ[ 9eZ[
.
3. Press
SELECT/INTCM
three-digit area code. If you make a mis-
take, repeatedly press
7 7 7 7
to move the cursor over the
FLASH
incorrect digit, then enter the correct
number.
Note: If an area code is already stored,
it appears on the display. To delete the
area code, press
times. Then enter your area code. Or
6 6 6 6
you can use
REDIAL
move the cursor and edit the area code.
4. Press
SELECT/INTCM
code, then press
MENU
handset to the base to clear the display.
.
MENU
twice to select
, then enter your
6 6 6 6
or
REDIAL
three
DELETE/CH
7 7 7 7
or to
FLASH
to store the area
or return the
13