Turning Caller Id/Call Waiting On/Off; Storing Your Area Code - Radio Shack 900 MHz Digital Spread Spectrum Cordless Phone with Digital Answerer and Caller ID/Call Waiting Deluxe Owner's Manual

Follow these steps to turn Auto Talk on or
off.
1. Lift the handset and press
Caller ID setup menu appears with
JWba JWba JWba JWba
selected.
2. Press to change the auto talk
SELECT
Ed Ed Ed Ed E\\ E\\
E\\ E\\
setting. or appears indicating the
selected setting.
3. To clear the display when you finish,
press or return the handset to the
MENU
base.
TURNING CALLER ID/CALL
WAITING ON/OFF
If you have Call Waiting and Caller ID ser-
vice, you can set the TAD to show Caller ID
information for an incoming call even while
you are on the phone.
Follow these steps to set the Caller ID/Call
Waiting feature.
1. Lift the handset and press
2. Press or
2 VOL/CID
(Caller ID/Call Waiting).
3. Press to change the Caller ID/
SELECT
Call Waiting setting.
appears.
Efj Efj
Efj Efj
Note: With the setting, you can use the
advanced Caller ID/Call Waiting options. See
"Call Waiting Options Service" on Page 19.
4. Return the handset to the base to store
the new setting.
STORING YOUR AREA
CODE
You can store your local area code in the
phone's Caller ID record so it does not show
the area code if the received call is from your
local area. If for some reason you need to
dial the area code (or store it in the memory),
you can add it afterwards. See "Adding/De-
leting the Area Code" on Page 21.
. The
MENU
7kje 7kje 7kje 7kje
Note: If your calling area requires 10-digit di-
aling including area code, do not enter the
area code. Leave this option blank.
Follow these steps to store your area code.
.
MENU
9 9 9 9
9?:9M 9?:9M
9?:9M 9?:9M
to select
Ed Ed Ed Ed E\\ E\\ Efj Efj
E\\ E\\ Efj Efj
, , or
Installation
1. Lift the handset and press
9 9 9 9
2. Press or
3 VOL/CID
7h[W 9eZ[ 7h[W 9eZ[
7h[W 7h[W 9eZ[ 9eZ[
.
3. Press , then enter your three-
SELECT
digit area code. If you make a mistake,
repeatedly press
REDIAL/
7# 7# 7# 7#
to move the cursor over the incor-
rect digit, then enter the correct number.
Note: If an area code is already stored,
it appears on the display. To delete the
area code, press
times, then enter your area code. Or you
6 6 6 6
can use
REDIAL/
move the cursor and edit the area code.
4. Press to store the area code,
SELECT
then press or return the handset
MENU
to the base to clear the display.
.
MENU
twice to select
6 6 6 6
or
FLASH/
three
DELETE/CH
7 7 7 7
or to
FLASH/
13