Mounting The System - Radio Shack SYSTEM 2100 Owner's Manual

43-982.fm Page 16 Monday, August 16, 1999 5:01 PM
For Line 2 only

MOUNTING THE SYSTEM

You can place the System 2100 directly on a desk, shelf, or
table, or mount it on a wall using the supplied mounting
bracket and screws.
Follow these steps to mount the system on a wall.
1. Select a location near the phone line jack(s) and mark
mounting screw locations 4
on the wall, side-by-side.
1
2. Drill two / -inch holes in the wall at the marked loca-
8
tions.
Note: For extra support, use the supplied wall anchors.
3. Thread a screw into each hole until the head extends
inch from the wall.
16
3
/ inches (106 mm) apart
16
1
/
8