Radio Shack SYSTEM 2100 Owner's Manual page 9

43-982.fm Page 9 Monday, August 16, 1999 5:01 PM
3. Use a Phillips screwdriver to remove the battery com-
partment screw on the bottom of the system and lift off
the cover.
4. Put the fresh batteries in the compartment as indicated
by the polarity symbols (+ and –) marked inside.
5. Replace the cover and tighten the screw. Reconnect
the phone line.
6. Turn the system over so you can see the display. After
you install batteries, the system displays
REV 1.6 (information about the system's software),
SET LANGUAGE , then
language).
7. To select another language, repeatedly press
2 minutes. The display cycles through
, and
SPANISH ENGLISH
Note: If you do not press any key within 2 minutes, the
system automatically selects English.
8. Press to store the selected language.
AREA CODE appear. The first
9. Within 2 minutes, repeatedly press
of your area code appears, then press
digit. The second
0
Repeat this step to set the second and third digits of
your area code.
ENGLISH (the default display
.
000
0 flashes.
until the first digit
to enter the
flashes.
TWIN640
within
FRENCH ,
and
SET
9