Radio Shack SYSTEM 2100 Owner's Manual page 10

43-982.fm Page 10 Monday, August 16, 1999 5:01 PM
Notes:
• If you make a mistake while setting the area code,
press
READ/DELETE
digit of the area code. Repeat this step to reset the
area code.
• If you do not press any key within 2 minutes, the ar-
ea code is automatically set to 000.
10. Press to store the area code.
pears. The flashes.
1
11. Repeatedly press
then press to store the digit. The second digit of the
year flashes.
Repeat this step to set the second, third, and fourth dig-
its.
Note: The correct date and time are automatically set
when the system receives its first call, but you can man-
ually set the date and time by following Steps 12–20.
12. Press to store the year.
The month digit flashes.
13. Repeatedly press
then press . The date's first digit flashes.
14. Repeatedly press
then press . The date's second digit flashes.
10
. The cursor moves to the first
1997 SET YEAR
until the desired first digit appears,
SET DATE 1/01
until the desired digit appears,
until the desired digit appears,
ap-
appears.