Radio Shack CID-932 Owner's Manual

Talking caller id

Advertisement

Quick Links

43-932.fm Page 1 Wednesday, January 12, 2000 9:56 AM
Cat. No. 43-932
OWNER'S MANUAL
Please read before using this equipment.
CID-932
Talking Caller ID

Advertisement

Table of Contents
loading

Summary of Contents for Radio Shack CID-932

  • Page 1 43-932.fm Page 1 Wednesday, January 12, 2000 9:56 AM Cat. No. 43-932 OWNER’S MANUAL Please read before using this equipment. CID-932 Talking Caller ID...
  • Page 2 The CID-932 announces the caller’s telephone number only and displays all available information. The CID-932 stores and displays up to 50 single (number only) or multiple (name and number) Caller ID records and lets you review them at any time.
  • Page 3 43-932.fm Page 3 Wednesday, January 12, 2000 9:56 AM This CID-932 has been tested and found to comply with all ap- plicable UL and FCC standards. WARNING: To reduce the risk of fire or shock hazard, do not ex- pose this product to rain or moisture.
  • Page 4: Fcc Information

    Caller ID information sent by the phone company. FCC INFORMATION We have designed your CID-932 to conform to federal regula- tions, and you can connect it to most telephone lines. However, each device, such as a telephone or answering machine that you connect to the telephone line draws power from the tele- phone line.
  • Page 5 If ringer operation is im- paired, remove a device from the line. Your CID-932 complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone company. Both numbers are located on the bottom of your CID-932.
  • Page 6: Important Safety Instructions

    TV • use outlets on different electrical circuits for the equipment and the radio or TV Consult your local Radio Shack store if the problem still exists. IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precau- tions should always be followed to reduce the risk of fire, elec- tric shock and injury to persons, including the following: 1.
  • Page 7 43-932.fm Page 7 Wednesday, January 12, 2000 9:56 AM 5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation, to protect it from overheating, these openings must not be blocked or covered.
  • Page 8 43-932.fm Page 8 Wednesday, January 12, 2000 9:56 AM 12. To reduce the risk of electric shock, do not disassemble this product; take it to a qualified serviceman when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electric shock when the appliance is subsequently used.
  • Page 9: Table Of Contents

    43-932.fm Page 9 Wednesday, January 12, 2000 9:56 AM CONTENTS Preparation ... 10 Installing a Battery ... 10 Mounting the CID-932 ... 11 Attaching the Bracket ... 11 Mounting on a Wall ... 12 Connecting the CID-932 ... 13 Setting the Time and Date ... 15 Operation ...
  • Page 10: Preparation

    INSTALLING A BATTERY You need one 9V battery (not supplied) to provide backup pow- er for the CID-932’s memory in the event of a power failure. For the best performance, we recommend an alkaline battery, avail- able at your local RadioShack store.
  • Page 11: Mounting The Cid-932

    MOUNTING THE CID-932 You can set the CID-932 flat on a desk, shelf, or table or attach the supplied bracket if you want the CID-932 to sit up at an an- gle. You can mount the CID-932 on a wall.
  • Page 12: Mounting On A Wall

    To remove the bracket, firmly hold the CID-932 and pull up on the top of the bracket. Mounting on a Wall To mount the CID-932 on a wall, you need two screws (not sup- plied) with heads that fit into the keyhole slots on the back of the CID-932.
  • Page 13: Connecting The Cid-932

    43-932.fm Page 13 Wednesday, January 12, 2000 9:56 AM CONNECTING THE CID-932 The CID-932 connects to a modular phone line jack and your telephone. 1. Unplug the telephone line cord from your telephone and plug it into the CID-932’s PHONE jack.
  • Page 14 CID-932 or the adapter. • Always connect the AC adapter to the CID-932 before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the CID-932.
  • Page 15: Setting The Time And Date

    3. Press DELETE to confirm. The minute digits flash. 4. Repeat Steps 2–3 to set the minutes, day, and month. The display returns to standby and the CID-932 is ready to re- ceive calls. for about 6 seconds until...
  • Page 16: Operation

    43-932.fm Page 16 Wednesday, January 12, 2000 9:56 AM OPERATION RECEIVING A CALL After the first ring, the CID-932 displays the caller’s telephone number (and name, if available) and the date and time of the call for about one minute, and announces the caller’s phone number (or a recorded Voice VIP message, if one has been as- signed to that number).
  • Page 17: Caller Id Messages

    43-932.fm Page 17 Wednesday, January 12, 2000 9:56 AM CALLER ID MESSAGES Display LONG DISTANCE Appears if your phone company sends information indicating that the incoming call is long distance. PRIVATE CALL Appears when the caller has blocked the number. There are no Caller ID records.
  • Page 18: Reviewing Caller Id Records

    If a telephone number is on the VIP Call list, the Voice VIP mes- sage for that number plays instead of the number. After the CID-932 announces the last number (or Voice VIP message), appears for about 20 seconds, then END OF RCV the CID-932 is ready to receive new calls.
  • Page 19: Deleting Caller Id Records

    43-932.fm Page 19 Wednesday, January 12, 2000 9:56 AM DELETING CALLER ID RECORDS To delete an individual call record, press DELETE twice while the number you want to delete is displayed. The deleted num- ber disappears and the next number in the CID-932’s memory appears. DELETE REVIEW...
  • Page 20: Reviewing And Re-Recording Voice Vip Messages

    CID-932 beeps twice and appears. See “Reviewing and Re-recording Voice VIP Messages”. If the VIP Call List is full, the CID-932 beeps twice and appears. You must delete a Voice VIP MEMORY FULL message to free a memory location. See “Deleting Voice VIP Messages”...
  • Page 21: Deleting Voice Vip Messages

    VIP LIST 2. Repeatedly press REVIEW VIP Call list until the telephone number you want to delete appears. 3. Press DELETE. The CID-932 beeps once and MSG? appears. 4. If you made a mistake, press REVIEW wise, press DELETE again to confirm the deletion. First...
  • Page 22: Care

    Repeat Steps 2–4 for other numbers you want to delete from the VIP Call list. If you do not press any button for 20 seconds, the CID-932 exits the VIP Call list and is ready to receive new calls. Press VOICE VIP to exit the VIP Call list sooner.
  • Page 23: The Fcc Wants You To Know

    43-932.fm Page 23 Wednesday, January 12, 2000 9:56 AM THE FCC WANTS YOU TO KNOW In the unlikely event that your phone causes problems on the phone line, the phone company can temporarily discontinue your service. If this happens, the phone company attempts to notify you in advance.
  • Page 24 43-932.fm Page 24 Wednesday, January 12, 2000 9:56 AM Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from Ra- dioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE...

This manual is also suitable for:

43-932

Table of Contents