43-974.fm Page 17 Monday, August 16, 1999 4:27 PM
All System 440 modules are set up as the
additional modules, you must program each additional module as an ex-
tension (
EXT
) module, or incoming calls might be disconnected. Follow
these steps to program an additional module as an extension (
module:
1. Hold down both
REVIEW
seconds until this display appears:
2. Release the
REVIEW
to set the module as an extension.
DELETE
The asterisk moves next to
MOUNTING THE MODULE
You can place the module directly on a desk, shelf, or table, or mount it
on a wall. To mount the module on the wall, you need two screws (not
supplied) with heads larger than the holes on the back of the supplied
mounting bracket.
MAIN
module. If you install
keys for over 8
keys and press
EXT
.
EXT
)
17