Mounting The Cid - Radio Shack CID 2903 Owner's Manual

MOUNTING THE CID

You can place the CID directly on a flat
surface with the supplied stand. Or, you
can mount it on a wall.
Follow these steps to mount the CID on a
wall.
1. Turn the CID over, then press in the
upper tabs and remove the stand.
2. Select a location near the phone line
jack and mark the mounting screw
3
locations 2 / inch (69 mm) apart on
4
the wall.
1
3. Drill two / -inch (3.5 mm) holes in the
8
wall at the marked locations.
4. Thread a screw into each hole until
1
the head extends /
8
from the wall.
16
Preparation
-inch (3.5 mm)