Icom IC-R2500 Instruction Manual page 9

Left band
ya
u
i
o
!0
*The same controls for both the left and
right bands are arranged in symmetry.
(p. ??)
➥ Starts priority watch when pushed for 1 sec. (p. ??)
ya MAIN•AGC KEY [MAIN•AGC]
➥ Push to select the main band. (p. 11)
➥ Push for 1 sec. to turn the AGC (Automatic Gain Con-
trol) function ON and OFF. (p. ??)
yb MAIN•NB KEY [MAIN•NB]
➥ Push to select the main band. (p. 11)
➥ Push for 1 sec. to turn the NB (Noise Blanker) function
ON and OFF. (p. ??)
uVFO/MEMORY•MEMORY WRITE KEY [VFO/MR•S.MW]
➥ Push to select and toggle VFO, memory and weather
channel* modes. (pgs. 12, 29, 38, 65)
*Weather channels available for USA versions only.
➥ Selects a memory channel for programming when
pushed for 1 sec. (pgs. 30, 39, 42)
PWR
MAIN
AGC
VFO/MR
S.MW
MHz
TS
VOL
COMMUNICATIONS RECEIVER
DIAL
SQL
MONI
T/T-SCAN
!1
SET
SKIP
VOL
iR2500
SQL
MODE ATT
SCAN PRIO
!1
i MHz TUNING•TUNING STEP [MHz•TS]
➥ Selects band selection, 1 MHz or 10 MHz tuning when
pushed. ((p. 9))
➥ Push and hold for 1 sec. to enter the tuning step selec-
tion mode. (p. ??)
• Rotate [DIAL] to select the desired tuning step.
o VOLUME CONTROL [VOL] (p. 16)
Adjusts the audio level for relative band.
!0 TUNING DIAL [DIAL]
Selects the operating frequency (p. 13), memory channel
(p. 29), the setting of the set mode item and the scanning
direction (p. 41) for the relative band.
!1 SQUELCH CONTROL [SQL]
Varies the squelch level for relative band. (p. 16)
PANEL DESCRIPTION
Right band
yb
MAIN
NB
u
VFO/MR
S.MW
i
MHz
TS
o
DIAL
!0
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
4