Icom IC-R2500 Instruction Manual page 41

i Push any switch for the main band or common switch to
exit tone squelch selection mode.
Appears when the pocket beep
with tone squelch is activated.
o When a signal with the matched tone is received, the re-
ceiver emits beep tones and blinks "S".
• Beep tones sound for 30 sec. and "S" blinks. To stop the
beeps and blinking manually, push any switch.
!0 Push and hold [MONI•T/T-SCAN] for 1 sec. to enter tone
squelch selection mode, then rotate [DIAL] to cancel the
tone squelch or DTCS squelch function.
• "oFF" is selected for turning the function OFF.
Appears when the pocket beep
with DTCS squelch is activated.
POCKET BEEP AND TONE SQUELCH
D Available tone frequency list
67.0 79.7 097.4 118.8 146.2
69.3 82.5 100.0 123.0 151.4
71.0 85.4 103.5 127.3 156.7
71.9 88.5 107.2 131.8 159.8
74.4 91.5 110.9 136.5 162.2
77.0 94.8 114.8 141.3 165.5
NOTE: The receiver has 51 tone frequencies and conse-
quently their spacing is narrow compared to units having
38 tones. Therefore, some tone frequencies may receive
interference from adjacent tone frequencies.
D Available DTCS code list
023 054 125 165 245
025 065 131 172 246
026 071 132 174 251
031 072 134 205 252
032 073 143 212 255
036 074 145 223 261
043 114 152 225 263
047 115 155 226 265
051 116 156 243 266
053 122 162 244 271
D Calling a waiting station using pocket beep
A subaudible tone matched with the station's CTCSS tone fre-
quency or 3-digit DTCS code with polarity is necessary. Use
the tone squelch on the next page ((p. 33)).
167.9 186.2 206.5 241.8
171.3 189.9 210.7 250.3
173.8 192.8 218.1 254.1
177.3 196.6 225.7
179.9 199.5 229.1
183.5 203.5 233.6
274 445 627
356 506 732
306 364 446 516 631 734
311 365 452 523 632 743
315 371 454 526 654 754
325 411 455 532 662
331 412 462 546 664
332 413 464 565 703
343 423 465 606 712
346 431 466 612 723
351 432 503 624 731
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
36