Recording A Memo; Changing The Remote Operation Security Code - Radio Shack TAD-1027 Owner's Manual

43-787.fm Page 12 Monday, August 16, 1999 8:11 AM
Notes:
• If you have played only a portion of
a message, the TAD-1027 might not
delete it.
• Individual messages can only be
deleted by remote operation.

RECORDING A MEMO

A memo is a message you can record at
the TAD-1027 without having to call in on
a phone.
Notes:
• The maximum memo length is 60
seconds.
• When memory is full, the TAD-1027
announces, "Memory is full," and
you cannot record the memo. Delete
old messages to make room in
memory (see "Deleting Messages"
on Page 11).
Follow these steps to record a memo.
1. Hold down
PLAY/SKIP
1027 beeps.
2. Speak in a normal voice into the
microphone on the front of the TAD.
3. The TAD-1027 automatically stops
recording after 60 seconds, or you
can press
ANSWER/STOP/DELETE
when you finish the memo. The
TAD-1027 beeps once.
12
The memo is recorded along with the in-
coming messages. To hear the memo,
simply play back your messages.
CHANGING THE REMOTE
OPERATION SECURITY
CODE
The TAD's remote operation security
code is preset to 787. You can operate
your TAD-1027 remotely with this code;
however, we recommend that you set
your own code.
Notes:
• Be sure to set each digit within 8
seconds. Otherwise, you must start
over from Step 1.
• If the AC power fails or if the backup
battery becomes weak, the remote
operation security code automati-
cally resets to 787.
1. Use a pointed object, such as a
straightened paper clip, to hold
until the TAD-
down
beeps and announces the first digit
of the current security code.
until the TAD-1027
CODE
Illus. showing
CODE switch.