Deleting Messages - Radio Shack TAD-739 Owner's Manual

43-739.fm Page 14 Friday, August 13, 1999 2:00 PM
To play only new messages, hold down
the desired button for 2 seconds.
PLAY
The TAD tells you how many new mes-
sages you have in that line and plays
them.
After all messages play, the TAD says,
"End of messages."
To replay a message during playback,
press . The current message
REPEAT
starts again from the beginning.
To return to a previous message, hold
down until you see the desired
REPEAT
message number.
To skip to the next message, press
To pause during playback, press the se-
lected line's button.
PLAY
appears. To resume playback, press the
selected line's button again within
PLAY
60 seconds. Otherwise, the TAD stops
playback, announces "End of messag-
es," and displays the total number of
messages.
To quickly play a message, hold down
. The playback speed increases, al-
SKIP
lowing you to quickly scan a message or
14
move to any place within it. To resume
normal playback, release
To stop playback at any time, press
. The TAD beeps and resets to an-
STOP
swer calls.

DELETING MESSAGES

To delete the current message during
playback, press
nounces "Erase." and beeps, then plays
the next message.
To delete all messages in a line after
. playback, hold down
SKIP
TAD says "Erase messages" and beeps.
appears and the selected line indica-
dL
tor next to each
"played" messages flashes. Press the
selected line's
sounds a long beep to confirm that all
messages in the selected line are delet-
ed.
PA (pause)
Notes:
• The TAD does not delete unplayed
messages. If you press
when you have unplayed messag-
es, the TAD sounds four beeps.
• To cancel the delete function soon
after you press
STOP/TIME SET
four beeps.
.
SKIP
. The TAD an-
DELETE
until the
DELETE
button that has
PLAY
button. The TAD
PLAY
DELETE
, press
DELETE
. The TAD sounds