Recording The Outgoing Messages - Radio Shack TAD-739 Owner's Manual

43-739.fm Page 10 Friday, August 13, 1999 2:00 PM
1. Hold until the TAD sounds
TIME SET
one long beep and one short beep,
(clock) appears briefly, then a
CL
number from 1
(Sunday)–
urday) appears, and the TAD an-
nounces the currently set day.
2. To change the day of the week, re-
peatedly press
REPEAT
backward or
SKIP
until the TAD announces the desired
day of the week.
3. Press . The TAD announc-
TIME SET
es the preset hour.
4. To change the hour (from 01 to 12),
repeatedly press
REPEAT
5. Press . The TAD announc-
TIME SET
es the preset minute.
6. To change the minutes (from 00 to
59), repeatedly press
.
SKIP
7. Press to confirm the set-
TIME SET
tings. The TAD sounds one long
beep and one short beep, then an-
nounces the day and time.
To check the current day/time at any
time, press
TIME SET
then the preset date and time appear
10
shortly, then the TAD announces the day
and time.
7 (Sat-
RECORDING THE
OUTGOING MESSAGES
Before the TAD-739 can answer calls
and record messages, you must record
an outgoing message (OGM). The TAD
lets you record two separate messages
of up to 32 seconds each, and it oper-
ates differently based on which mes-
to move
sage you select.
to move forward
or .
SKIP
Hint: Do not tell the callers that you are
out of town or not home. Instead, say
that you cannot come to the phone right
now.
or
REPEAT
Note: The maximum length for each out-
going message is 32 seconds. As you
record, the message counter shows the
recording time.
Follow these steps to record your outgo-
ing message.
. (clock) and
CL
• OGM 1 – After playing your outgo-
ing message, the TAD records the
caller's message.
• OGM 2 (announce-only) – The TAD
plays your outgoing message, but
does not record a message.
If you plan to use the TAD's
announce-only feature,
should clearly state that the caller
cannot leave a message.
OGM 2