Recording Outgoing Messages (Ogm) - Radio Shack Digital Answering System with Big Button Trim Phone Owner's Manual

your messages from another phone, see "Remote Operation"
on Page 30.)

Recording Outgoing Messages (OGM)

The system has a built-in outgoing message that says, "Hello,
please leave a message after the tone." Use this message or
record your own.
Hold down
ANNOUNCE
into the microphone from about 10 inches away. Release
when you finish your message. The system automati-
NOUNCE
cally plays back your recorded message.
Notes:
• A new OGM must be longer than 1 second or the system
disregards it and uses the default OGM.
• The maximum length for an outgoing message is 30 sec-
onds. When it reaches the maximum outgoing message
length, the system sounds 3 tones and plays the portion of
the message the system recorded.
• If you record your own message and subsequently decide
to use the prerecorded message, press
the OGM, then press
recorded message.
To hear the outgoing message at any time, press
To stop listening to the outgoing message before it ends, press
ON/OFF/STOP
. When the system beeps, speak clearly
.
Answering System
during playback to erase the
DELETE
to play
ANNOUNCE
ANNOUNCE
AN-
.
25