Tad Operation; Selecting The Outgoing Message; Recording/Deleting An Outgoing Message - Radio Shack TAD -797 Owner's Manual

43-797.fm Page 28 Monday, August 16, 1999 9:20 AM

TAD OPERATION

SELECTING THE
OUTGOING MESSAGE
The TAD has two prerecorded outgoing
messages. One asks the caller to leave
a message: "Hello, no one is available to
take your call. Please leave a message
after the tone." The TAD uses this mes-
sage when is set to
REC TIME
"Setting the Record Time" on Page 29).
The other is simply an announcement
and does not let the caller leave a mes-
sage: "Hello, no one is available to take
your call." The TAD uses this message
when is set to
REC TIME
nouncement only)
You can also record your own message
(see "Recording/Deleting an Outgoing
Message"). When you record your own
outgoing message, the TAD uses it for
all settings.
REC TIME
To switch between your outgoing mes-
sage and the TAD's prerecorded mes-
sage, press . When the current
OGM
message begins to play, press
again. The TAD switches to the other
message and plays it.
28
RECORDING/DELETING
AN OUTGOING MESSAGE
To record your outgoing message (up to
30 seconds long), hold down
the TAD beeps and
you finish your message, press
The TAD plays back your message.
or (see
1 4
(an-
ANN
Hint: Do not tell callers that you are not
home. Instead, say that you cannot
come to the phone right now.
Note: The TAD-797 cannot record an
outgoing message less than two sec-
onds long.
To delete your outgoing message and
use the TAD's prerecorded messages,
OGM
hold down
Then press
onds.
OGM
appears. When
--
until the TAD beeps.
OGM
again within two sec-
OGM
until
.
STOP