Table of Contents
Advertisement
43-732.fm Page 23 Friday, August 13, 1999 1:42 PM
TAD OPERATION
SETTING THE TAD TO
ANSWER CALLS
The TAD-732 is ready to answer and
record calls with the prerecorded outgo-
ing message as soon as you connect it
to AC power. To record your own outgo-
ing message, see "Recording an Outgo-
ing Message."
To turn off the TAD so it does not an-
swer calls, press
ANSWER
or press
,
REMOTE
CHANGE ( )
on the handset. The TAD an-
SWER ( )
nounces "Answer off" and the message
counter display clears.
To turn on the TAD, press
the base, or press
REMOTE
then
( )
ANSWER ( )
The TAD announces "Answer on" and
the message counter shows the number
of recorded messages.
Note: When you turn on/off the TAD
with the handset, you must press
again after the handset announc-
MOTE
es "Answer on" or "Answer off" so the
message counter shows the answer on/
off status.
USING THE MAILBOXES
The TAD-732 has a general message
center and two user mailboxes. It is pre-
set to record messages in the message
center, but a caller can record a mes-
sage for mailbox 1 by pressing
or for mailbox 2 by pressing
ter the outgoing message plays over
within 6 seconds. If the caller presses
then 1 or 2 after the outgoing message
on the base,
plays over for more than 6 seconds, the
then
TAD-732 records message into both
AN-
message center and the selected mail-
box.
Be sure your outgoing message tells the
caller how to record a message for the
desired mailbox.
RECORDING AN
OUTGOING MESSAGE
on
ANSWER
,
CHANGE
The TAD-732's prerecorded outgoing
on the handset.
message says, "Hello, please leave a
message after the tone." You can also
record your own outgoing message up
to 60 seconds long for the caller to hear
when the TAD answers a call.
RE-
Hint: Do not tell callers that you are not
home. Instead, say that you cannot
come to the phone right now.
Notes:
• If you set the TAD to announce-only,
be sure to state that the caller can-
not leave a message.
then 1,
then 2 af-
23
Advertisement
Table of Contents
