Telephone Operation; Setting The Pulse/Tone Switch; Setting The Ringer - Radio Shack Digital Answering System with Big Button Trim Phone Owner's Manual

ˆ

Telephone Operation

SETTING THE PULSE/TONE SWITCH

Set
PULSE/TONE
have. If you are not sure which type you have, do this test:
Lift the handset and set
the dial tone, press any number other than
Notes:
• If your phone system requires that you dial an access code
( , for example) before you dial an outside number, do not
9
press the access code either.
• does not function when
#
If the dial tone stops, you have touch-tone service. Leave
PULSE/TONE
If the dial tone continues, you have pulse service. Set
to
TONE PULSE

SETTING THE RINGER

To turn off the telephone's ringer, set
still make outgoing calls and, if you hear an extension phone
ring, you can still answer calls. To turn on the telephone's ring-
er, set
RINGER
18
on the handset for the type of service you
PULSE/TONE
set to .
TONE
.
to or
HIGH
Telephone Operation
to
PULSE/TONE
RINGER
for high or low ringer volume.
LOW
. When you hear
TONE
.
0
is set to
PULSE
to
OFF
.
PULSE/
. You can