Setting parameters with the BOP20
4.2 Displays/indicators and using the BOP20
Parameter display
The parameters are selected in the BOP using their respective numbers. To call up the
parameter display from the status display, press the "P" key. You can search for the
parameters you require using the arrow keys. To display the parameter value, press the "P"
key again. You can switch between the drive objects by simultaneously pressing the "Fn"
key and the arrow keys. You can switch between r0000 and the parameter that was last
displayed by pressing the "Fn" key in the parameter display.
Figure 4-2
18
P
P
P
1 )
FN
Parameter display
FN
P
P
P
P
P
P
P
P
Operating Instructions, 03/2013, A5E00809375A
Basic Operator Panel 20 (BOP20)