Operation Using The Menu Display; Viewing The Menu Display - Olympus DP21 Instructions Manual

2-6-2 Operation using the MENU display

This section describes the operation method of the functions that are available in the MENU display on the monitor
screen. This section pertains to the recording operation (in the REC AUTO/REC MANUAL modes). See page 21 for the
basic operations and flow of the MENU display.
Settings in the REC modes
· Use the MODE button to select the REC AUTO or REC MANUAL mode.
· Use the MENU button to view the MENU display on the monitor screen.
· Be sure to press the SET/OK button after each setting to enter it.
1

Viewing the MENU Display

1. Press the MENU button to view or hide the MENU display.
2. Press a cursor button to place the cursor on the desired item.
3. Press the SET/OK button to enter the selection.
}For applied functions and settings, see "Applied operations" (p. 34).
Page select tabs
Tab
Page for the camera's basic functions
The image quality mode, ISO speed, etc. can be set in this page.
Page for the camera's applied functions.
Rec View, Scale, etc. can be set in this page.
Page for the camera's display functions.
The focusing indicator, AE area, etc. can be viewed or hidden in this page.
Page for the measurement functions.
Measurements of image can be started from this page.
Page for options.
Selection of the folder of the image to be played and setting of the language and date are avail-
able.
Page for the guidance on microscope.
The guidance can be displayed and manipulated.
*This page is displayed only when the conrol box (U-CBS, etc.) is connected.
Content
SAL System
29