Operation Using Mouse And Keyboard - Olympus DP21 Instructions Manual

7

Operation Using Mouse and Keyboard

When the USB mouse is connected to the control box, the DP21 can be controlled using the mouse. However, the
functions available with the dedicated buttons on the hand switch, such as OTWB cannot be controlled from the mouse.
These functions should be controlled using the hand switch buttons even when the mouse is connected.
Mouse/keyboard connection method
Connect the mouse and keyboard to the desired USB ports of the control box.
}If the mouse or keyboard is connected to the USB port of the hand switch, the mouse or keyboard may sometimes be
unable to work due to the insufficient power supply. To prevent this, always connect the mouse and keyboard to the USB
ports of the control box.
}For the compatibility of the mouse and keyboard, see page 15.
Functions available using the mouse
1. Functions that can be executed with the mouse
· Pop-up menu:
A pop-up menu is opened when the mouse is right-clicked on a
window other than the MENU/INFO display. The pop-up menus can
be used to control the following functions.
· Settings of MENU display items:
(icon) on the MENU display and left-click the mouse.
· Selection of played image thumbnails:
on the thumbnail to be viewed, and left-click the mouse.
· Hiding the MENU/INFO display:
click the mouse.
· Still image recording: Double-click the mouse when the MENU is not displayed. Note that this cannot start movie
recording.
2. Functions that can be simplified by the mouse
· Measurement (The measurement points can be specified directly using the mouse.)
3. Functions that can be used only when the mouse and keyboard are connected
· Text input
· Network setting
· When the save destination on the network has an ID or password set to it
· Save folder setting by direct input of the folder address
· MODE switching
· MENU/INFO display/hiding
· Zoom setting (Index/1x/2x/4x)
Move the cursor with the mouse, place the cursor on the desired function
Place the cursor on "
Move the cursor in the index menu with the mouse, place the cursor
" on the top right of the MENU/INFO display and left-
SAL System
59