Olympus DP72 Instructions Manual
  1. Manuals
  2. Brands
  3. Olympus Manuals
  4. Digital Camera
  5. DP72
  6. Instructions manual

Olympus DP72 Instructions Manual

Microscope digital camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

INSTRUCTIONS
DP72
MICROSCOPE DIGITAL CAMERA
This instruction manual is for the Olympus Microscope Digital Camera Model DP72. To ensure the
safety, obtain optimum performance and familiarize yourself fully with the use of this camera, we
recommend that you study this manual thoroughly before operating the camera.
For image operations including recording, editing and saving, please refer to the Online Manual for
the DP2-TWAIN/DP2-BSW Software.
Retain this instruction manual in an easily accessible place near the work desk for future reference.
A X 7 7 4 1

Advertisement

Table of Contents
loading

Related Manuals for Olympus DP72

Summary of Contents for Olympus DP72

  • Page 1 DP72 MICROSCOPE DIGITAL CAMERA This instruction manual is for the Olympus Microscope Digital Camera Model DP72. To ensure the safety, obtain optimum performance and familiarize yourself fully with the use of this camera, we recommend that you study this manual thoroughly before operating the camera.
  • Page 2 Refer to your local Olympus distributor in EU for return and/or collection systems available in your country. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 3: Table Of Contents

    DP72 CONTENTS IMPORTANT — Be sure to read this chapter for safe use of the equipment. — SYSTEM CHART 7, 8 NOMENCLATURE 9, 10 HARDWARE INSTALLATION 11-15 Installing the Low-Profile Bracket ..........................11 Installing the PCIe Interface Board........................... 11 Installing the Camera Head ..............................13 Connecting the Cables ................................

  • Page 4: Important - Be Sure To Read This Chapter For Safe Use Of The Equipment

    IMPORTANT The DP72 microscope digital camera is designed to be connected to a camera adapter mounted on an Olympus UIS2/UIS series of optical microscope (not applicable to the LB series) for use in recording of microscopic magnified images at high speed (about 2.5 seconds) and highest resolution while maintaining high picture quality and high color reproduction.
  • Page 5 2. The computer used with this system should set up and run Microsoft Windows XP Professional, Vista Business or Ultimate. For the OS in the computer, the user is requested to create a backup and retain it carefully. (Olympus does not support the matters related to the OS including its backup.) For details on the computer and Microscope Windows XP or Vista refer to their respective manuals.
  • Page 6 A camera adapter with a magnification below 0.5X cannot be used because part of image will be cut off. 2. When the DP72 is connected to the rear port of the U-DPT or U-MPH, the peripheral part of the recorded image may be deteriorated due to the optical performance of the U-DPT or U-MPH.
  • Page 7 6. Sequential connection of PCIe units Up to two PCIe units including the DP72 and a PCI interface board of the DP71/DP70/DP30BW or FV1000 (FV10-ASW-V1.5 or later) can be connected in series. Series connection of the FV300/FV500 is not possible.
  • Page 8 Recommended Computer Specifications -- Laptop Computer -- 1. Computer requirements PC/AT compatible Intel Core2 Duo 1,8 GHz or greater [Core2 Duo T7300, 2.0 GHz or greater recommended] Chipset Intel 945 or later DDR2, 512 MB or more. [In the case of Windows Vista, 1GB or more] [PC2-5300 or greater, dual-channel DDR2 recommended] Free space 500 MB or more Graphic...
  • Page 9 DP72 Getting Ready 1. The camera head uses precision components. Handle it with care and avoid subjecting it to a sudden or severe impact. 2. The image displayed on the monitor may be affected when it is used near equipment generating strong electromagnetic waves.

  • Page 10: System Chart

    HDD-to-FDD power conversion cable PCIe interface board DP72 Camera head Low-profile bracket DP2-TWAIN DP2-BSW TWAIN Driver Basic Software (Ver 2.1 or later) (Note) Microscopes that are not listed in the above may also be applicable. For details, please consult Olympus.
  • Page 11 Camera head Low-profile DP2-TWAIN bracket TWAIN Driver DP72-PXU PCIe Extension Unit ExpressCard PCIe x1 cable Laptop computer PCIe extension box AC adapter (Note) Microscopes that are not listed in the above may also be applicable. For details, please contact Olympus.

  • Page 12: Nomenclature

    NOMENCLATURE 2-1 DP72 (For Desktop Computer) Any equipment connected to the camera head should be an Olympus-designated product or a Camera Head product in compliance with the requirements of IEC60950 or CISPR22/24. If equipment other than these products is connected, Olympus cannot guarantee any performance of the camera.
  • Page 13 DP72 2-2 [OPTIONAL] DP72-PXU PCIe Extension Unit (For Laptop Computer) PCIe Extension Box PCIe cable connector (P. 15) PCIe x1 cable (P. 15) AC adapter connector (P. 15) Vertical installation plates (P. 12) With 2 screws ExpressCard AC Adapter PCIe cable connector (P.

  • Page 14: Hardware Installation

    Fig. 1 (Figs. 2 & 3) DP72 (For Desktop Computer) Set (Figs. 2 & 3) # Before installing the PCIe interface board in the computer, be sure to read the instruction manuals for the computer in order not to damage them.
  • Page 15 DP72 Optional DP72-PXU (Figs. 4 & 5) 1. Using a Phillips screwdriver, remove the six screws @ clamping the top cover of the extension box and then remove the cover. 2. Remove the bracket clamping screw ². 3. Connect the PCIe interface board ³ with low-profile bracket to the connector |.

  • Page 16: Installing The Camera Head

    }The DP-TRAD tripod adapter is provided with two types of screws (2 each) and an Allen wrench. Use only the Phillips screws (x 2) with the DP72. 1. Attach the DP-TRAD tripod adapter | to the camera head 5 and clamp them using the provided Phillips screws (x 2) with a Phillips screwdriver.

  • Page 17: Connecting The Cables

    The cords and cables are vulnerable to bend or twist. Do not apply excessive force to them. Be sure to switch off the computer before proceeding to the connections. Always use the cables designated by Olympus. NOTE When connecting the cable, insert the connector plug in ²...
  • Page 18 2. Insert the connector ² of the power cord to the connector on the AC adapter. # Always use the power cord provided by Olympus. If no power cord is provided with the camera head, please select the proper power cord by referring to chapter “PROPER SELECTION OF THE POWER SUPPLY...

  • Page 19: Dp2-Twain Software Installation

    DP72 DP2-TWAIN SOFTWARE INSTALLATION }For installation of the DP2-BSW software, refer to the instruction manual provided with it. Before Installation (Applicable OS: Windows Vista/Windows · Quit all running applications before installing DP2-TWAIN. · The software cannot be installed unless the user account is registered as “computer administrator.”...
  • Page 20 7. Read the displayed Licensing Agreement, check “Yes,, I 10. The [Select Additional Tasks] window appears. Check the accept all the terms of the Licensing Agreement.” and then task to be used and click on the [Next] button. click on the [Next] button. 11.
  • Page 21 DP72 12. When the [Windows Security] dialog box appears, click on 16. Click on [System and Maintenance]. [Install]. Make sure not to click on [Get started with Windows] or [Back up your computer]. 13. When the installation completes, the window below appears.
  • Page 22 19. When the [User Account Control] dialog box appears, click on the [Continue] button. 20. If the driver has been properly installed, “MalAd Device” should be displayed as shown below. After confirming this, click on the [ ] button.

  • Page 23: Windows Xp

    DP72 2. Windows 1. Start Windows XP. (Log on with the Computer Administrator 7. Read the displayed Licensing Agreement, check “Yes,, I account.) accept all the terms of the Licensing Agreement.” and then 2. When the following dialog box appears in a while, click on click on the [Next] button.
  • Page 24 10. The [Select Additional Tasks] window appears. Check the 12. When the installation completes, the window below appears. task to be used and click on the [Next] button. Then click on the [Finish] button. 11. The [Start Copying Files] window appears. 13.
  • Page 25 DP72 16. Click on [System]. 17. When the [System Properties] dialog box appears, click on [Hardware] and then on [Device Manager]. 18. If the driver has been properly installed, “MalAd Device” should be displayed as shown below. After confirming this, click on the [ ] button.

  • Page 26: Image Recording Procedure

    *1. “TWAIN-compatible application” means software with TWAIN interface compatibility such as Photoshop*, Microsoft Office*, etc. (*: Operations of these applications have been confirmed.) *2. With Photoshop, DP2-TWAIN can be launched by selecting [File]-[Import]-[OLYMPUS DP2-TWAIN2.1]. For how to launch DP2-TWAIN from other TWAIN-compatible application, refer to the manual for the TWAIN- compatible application.

  • Page 27: Displayed Windows

    DP72 DISPLAYED WINDOWS Image Record Window }This window is displayed at the startup and used to record still images and movies. For details, refer to the DP2-TWAIN Online Manual.

  • Page 28: External Triggering

    EXTERNAL TRIGGERING }When the DP2-BSW basic software is used, the DP72 can record still images or control a commercially available shutter based on an external trigger signal. · The external trigger function is not available with the DP2-TWAIN. · The trigger input function is for the present unavailable even with the DP2-BSW. It will be made downloadable as soon as it is ready.
  • Page 29 DP72 Trigger Output · The trigger output can be used to control a commercially available shutter. · The positive and negative logics of the trigger output can be switched with the DP2-BSW. · The trigger output is interlocked with the shutter release/close operations of the DP2-BSW.

  • Page 30: Specifications

    SPECIFICATIONS DP72 Specifications Item Specifications Camera syste Single-CCD color camera. Pixel shifting type. Image pickup device 2/3-inch color CCD. Total pixels: 1.5 million pixels. Effective pixels: 1.45 million pixels. Pixel pitch: 6.45 μm (H) x 6.45 μm (V). Scanning method: Progressive scanning.
  • Page 31 DP72 Item Specifications External triggering* Input: Event trigger input. (Although the trigger input is not available for the present, it will be enabled by updating as soon as it is ready.) Output: Trigger output. With exposure time lag (0 to 2 sec. in 10 msec. steps). TTL compatible.
  • Page 32 Item Specifications < > Dimensions & weight DP72 Camera head 112( ) x 87.8(H) mm (excluding projections), approx. 1, 1 50 grams PCIe interface board 181(W) x 121(D) x 21.6(H) mm (excluding projections), approx. 200 grams Interface cable Approx. 2.7 meters External trigger cable Approx.

  • Page 33: Troubleshooting Guide

    Under certain conditions, the performance of the camera may be adversely affected by factors other than defects. If problems occur, please review the following list and take remedial action as needed. If you cannot solve the problem after checking the entire list, please contact Olympus for assistance. Problem...
  • Page 34 Problem Cause Remedy Page AE lock, which was set when the expo- Cancel AE lock. e) Picture is too dark. sure time was shorter than the currently (Online required exposure time, is active. manual) The output highlight level adjustment is Reset the current level adjustment (Online too low.

  • Page 35: Software Uninstallation

    4. The [User Account control] dialog box appears to ask you “Windows needs your permission to continue”. Click on the [Continue] button. 5. The [Question] dialog box appears to ask you “Do you really want to uninstall OLYMPUS DP2-TWAIN?”. Click on the [Yes] button. Uninstalling will start.

  • Page 36: Proper Selection Of The Power Supply Cord

    If no power supply cord is provided, please select the proper power supply cord for the equipment by referring to “ Specifications ” and “ Certified Cord ” below: CAUTION: In case you use a non-approved power supply cord for Olympus products, Olympus can no longer warrant the electrical safety of the equipment.
  • Page 37 DP72 Table 2 HAR Flexible Cord APPROVAL ORGANIZATIONS AND CORDAGE HARMONIZATION MARKING METHODS Alternative Marking Utilizing Printed or Embossed Harmoniza- Black-Red-Yellow Thread (Length tion Marking (May be located on Approval Organization of color section in mm) jacket or insulation of internal wir-...
  • Page 38 MEMO...
  • Page 40 Shinjuku Monolith, 3-1, Nishi Shinjuku 2-chome, Shinjuku-ku, Tokyo, Japan Wendenstraße 14-18, 20097 Hamburg, Germany 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. One Corporate Drive, Orangeburg, NY 10962, U.S.A. 491B River Valley Road, #12-01/04 Valley Point Office Tower, Singapore 248373 31 Gilby Road, Mount Waverley, VIC., 3149, Australia 5301 Blue Lagoon Drive, Suite 290 Miami, FL 33126, U.S.A.

Table of Contents