Creating A Dial-Up Networking Connection - Axis 2100 User Manual

AXIS 2100 User's Guide

Creating a Dial-up Networking Connection

To create a Dial-up networking connection to your AXIS 2100, follow these steps:
Double-click My Computer and
then double-click the
Dial-Up Networking icon.
the performance of your AXIS
2100 when using the
Null-Modem cable, set the
Maximum Speed to 115200.
Click OK to return to the Make New
Connection dialog. Click Next>.
You have now successfully created your
dedicated Dial-Up Networking connection
for your AXIS 2100. Click Finish.
Double-click the Make New
Connection icon.
Provide the connection with a
name (AxisCamera is the name
used in the subsequent
examples).
To significantly improve
The telephone numbers requested in the
following dialog are not required for use in
the logical connection to your camera. To
bypass the wizard error correction, simply
enter any dummy number into the Area
code, Telephone number and Country code
fields. Click Next>.
Using Your Camera with a Modem
From the drop down list,
select the Standard Modem
previously created for the AXIS
2100 as the selected device.
Click Configure...
The Dial-up Network connection
is displayed. You are now ready
to refine the Dial-Up networking
properties, as described in the
next section.
17