Give Limited Access To Operators; Set Up Secure Connection; Clear All Events; Use Virtual Ports To Trigger Actions - Axis P1445-LE User Manual

AXIS P1445-LE-3 License Plate Verifier Kit
Additional settings
1. Go to Settings > Detection parameters.
2. Under Allowed character deviation, select the number of characters that are allowed to be different.
3. Check that the application matches the license plates as expected.

Give limited access to operators

Operators can be given a limited access to the app using an URL. This way they only have access to the Event log and List
management. The URL can be found under Settings > User rights.

Set up secure connection

To protect communication and data between devices, for example between the camera and the door controller, set up a secure
connection with HTTPS using certificates.
1. Go to Settings > Security.
2. Under HTTPS, Enable HTTPS.
3. Select either Self-signed or CA-signed.
Note
Find out more about HTTPS and how to use it at .

Clear all events

After you set up the app, it can be a good idea to clear the records of any images or captured plates from the setup process.
To clear all images and plates from the database:
Go to Settings > Maintenance.
• Click Clear all recognition results.
• Click Yes.

Use virtual ports to trigger actions

Virtual ports can be used together with access control to trigger any kind of action. This example explains how to set up
AXIS License Plate Verifier together with the camera's I/O port to display a text overlay using a virtual port.
Requirements:
• Camera physically installed and connected to the network.
• AXIS License Plate Verifier up and running on the camera.
• Cables connected between the barrier and the camera's I/O port.
• Basic setup done. See Basic setup on page 4 .
1. Go to the application's webpage and select the Settings tab.
2. Go to Access control
3. Under Access control , select the Type drop-down list, select Internal I/O.
4. Select the I/O output #.
5. Select a port in the Virtual port drop-down list.
16