Rear Panel - Axis 2100 User Manual

AXIS 2100 User's Guide

Rear Panel

Network Connector
The AXIS 2100 is designed
for 10 Mbps Ethernet and
100 Mbps Fast Ethernet
networks and connects to
the network via a twisted
pair category 5 cable
(10baseT and 100baseTX)
terminated using a stan-
dard RJ-45 connector. Sup-
porting NWAY, the AXIS
2100 detects the speed of
the local network segment
and varies the speed of
data communication
accordingly, between 10
Mbps and 100 Mbps.
I/O Connector
Provides the physical interface to a digital output, and a single digital photo-coupled
input that is used for connecting a variety of external alarm devices to the AXIS 2100;
including, IR-sensors, switches and alarm relays. In combination with the configurable
alarm facilities, you can quickly develop a variety of security applications that are trig-
gered on time - or alarm based - events. The connector can also be utilized as an alter-
native connection point for DC supply to the unit.
Note:
The power supply supplied with your AXIS 2100 is country specific. Please check that the type of
power supply you are using is correct. See page 10.
Network Indicator
After completion of the startup and self test routines, this
multi-colored indicator flashes independently, as follows:
• yellow - activity on a 10Mbps network
• green - activity on a 100Mbps network
• red - no physical connection to the network
Physical Description
Power Indicator
Normally lit when
power is applied. If it
is not lit, or it flashes,
there is a problem
with the AXIS 2100
external power
source.
Power Supply
Connector
A single Jack socket
(PS-D) for connection
of AXIS 2100 power
supply. The terminal
block connector pro-
vides an auxiliary con-
nection point for AC
or DC power to the
unit.
RS-232 Serial
Connector
The serial connector provides
the RS-232 interface for a
modem. Alternatively it pro-
vides the connection for the
AXIS 2191 Audio Module.
9