Creating A Dial-Up Networking Connection - Axis 2120 User Manual

Installing Your Camera to a Modem
18

Creating a Dial-up Networking Connection

Follow the steps below to create a dial-up networking connection to your AXIS 2120:
Double-click My Computer and
then double-click the Dial-Up
Networking icon.
Click OK and then click
Next>.
You have now successfully created your
dedicated dial-up networking connection
for your AXIS 2120. Click Finish.
Double-click the Make New
Connection icon.
Provide the connection with a
name (AxisCamera is the name
used in the subsequent examples).
To significantly
improve the performance
of your AXIS 2120 when
using the Null Modem
cable, set the Maximum
Speed to 115200.
The telephone numbers requested in the
following dialog are not required for use in
the logical connection to your camera. To
bypass the wizard error correction, simply
enter any dummy number into the Area
code, Telephone number and Country code
fields. Click Next>.
AXIS 2120 User's Manual
From the drop down dialog,
select the Standard Modem pre-
viously created for the AXIS
2120 as the selected device.
Click Configure...
The new dial-up network con-
nection is displayed. You are
now ready to refine the dial-up
networking properties, as
described in the next section...