Status - Local Network - Cisco RV220W User Manual

Status - Local Network

Local Network
Current IP Ad-
dress System
Mac Address
IP Address
Subnet Mask
IPv6 Address
DHCP Server
Start IP Address
End IP Address
DHCP Client Table
ARP/RARP Table
Figure 63: Local Network Screen
This shows the current system.
This is the Router MAC Address, as seen on your local, Ethernet
network.
The Internet IP Address is displayed here.
This Subnet Mask is associated with the IP address above.
This shows the IPv6 IP address, if applicable.
The status of the Router's DHCP server function is displayed here.
This shows the beginning of the range of IP addresses used by the
DHCP Server.
This shows the end of the range of IP addresses used by the DHCP
Server.
Clicking this button will open a screen showing you which PCs are
utilizing the Router as a DHCP server. On the DHCP Client Table
screen, you will see a list of DHCP clients (PCs and other network
devices) with the following information: Client Names, Interfaces,
IP Addresses, MAC Addresses, and the length of time before their
assigned IP addresses expire.
Clicking this button will open a screen showing you which PCs are
utilizing the Router as an ARP/RARP server. On the ARP/RARP
Table screen, you will see a list of ARPs/RARPs (PCs and other
network devices) with the following information: IP Addresses and
MAC Addresses.
97