Status > Router; Status > Local Network - Cisco Linksys WRT310N User Manual

Chapter 3
Firmware Upgrade
Before upgrading the firmware, download the Router's
firmware upgrade file from the Linksys website,
www.linksys.com. Then extract the file.
Please select a file to upgrade the firmware
Browse and select the extracted firmware upgrade file.
Start to Upgrade After you have selected the
appropriate file, click this button, and follow the on-screen
instructions.
Status > Router
The Router screen displays information about the Router r
and its current settings.
Status > Router
Router Information
Firmware Version This is the version number of the
Router's current firmware.
Current Time This shows the time set on the Router.
Internet MAC Address This is the Router's MAC Address,
as seen by your ISP.
Host Name If required by your ISP, this was entered on
the Basic Setup screen.
Domain Name If required by your ISP, this was entered
on the Basic Setup screen.
Internet Connection
This section shows the current network information
stored in the Router. The information varies depending on
the Internet connection type selected on the Basic Setup
screen.
Click Refresh to update the on-screen information.
Wireless-N Gigabit Router
Click
f f
Advanced Configuration
Status > Local Network
The Local Network screen displays information about the k
local, wired network.
Status > Local Network
Local Network
Local MAC Address The MAC address of the Router's
local, wired interface is displayed here.
Router IP Address This shows the Router's IP address, as
it appears on your local network.
Subnet Mask This shows the Subnet Mask of the Router.
DHCP Server
DHCP Server The status of the Router's DHCP server
function is displayed here.
Start IP Address For the range of IP addresses used by
devices on your local network, the starting IP address is
shown here.
End IP Address For the range of IP addresses used by
devices on your local network, the ending IP address is
shown here.
DHCP Clients Table Click this button to view a list of PCs
that are using the Router as a DHCP server.
DHCP Clients Table
28