L2 Switch - Port Setting - Cisco RV220W User Manual

L2 Switch - Port Setting

Port Setting
Port
Link
Mode
Flow Control
Jumbo Frame
Figure 58: Port Setting Screen
Displays the physical port number.
Displays the port duplex mode and speed. Full Duplex indicates that
the interface supports transmission between the device and its link
partner in both directions simultaneously. Half Duplex indicates that
the interface supports transmission between the device and the client
in only one direction at a time.
Select the port duplex mode and speed from the drop-down menu.
You can also select Auto Negotiation, which is a protocol between
two link partners that enables a port to advertise its transmission
rate, duplex mode and flow control abilities to its partner.
Displays the flow control status on the port. Operates when port is
in Full duplex mode.
Displays the maximum frame size the port can receive and send.
92