Setup - Time Screen - Cisco RV220W User Manual

Setup - Time Screen

You can either define your Router's time manually or automatically through Time Server.
Data - Time Screen
Time
•
Time
•
Time Zone Select the time zone for your location.
Auto Daylight To use the daylight saving feature, select Enabled. Enter the Month
and Day of the start date, and then enter the Month and Day of the end
Saving
date.
User-defined If you want to use your own NTP server, select the Enabled option.
NTPServer The default is Disabled.
NTP Serve IP Enter the IP address of your own NTP server.
Figure 13: Time Screen
Set the local time Manually - If you wish to enter the time and
date manually, enter the Day, Month, Year, Hour, Minute, and
Second in the Time field using 24 hour format (example 10:00pm
would be entered 22:0:0).
Set the local time using Network Time Protocol (NTP) Auto-
matically - Select the time zone for your location and your setting
synchronizes over the Internet with public NTP (Network Time
Protocol) Servers.
27