1. Connect one end of an Ethernet cable into the Data In port on the PoE base unit and the other end into one port on your switch, router, or computer.

2. Connect one end of an Ethernet cable into the P+Data Out port on the PoE base unit and the other end into the LAN1 (PoE) port on the Access Point.

3. Use the supplied power adapter. Connect the power adapter to the Power In receptor on the PoE adapter.

4. Connect the power cable to the power adapter and then connect the other end into a power outlet.

DAP-2660

Table of Contents

This manual is also suitable for:

Airpremier dap-2660

Method 2 - Poe Without Poe Switch Or Router - D-Link DAP-2660 User Manual

Method 2 - PoE without PoE Switch or Router

Related Manuals for D-Link DAP-2660

Related Content for D-Link DAP-2660

This manual is also suitable for:

Table of Contents