Lan - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-2660.
These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal
network and cannot be seen on the Internet.
Get IP From: Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-2660. When Dynamic IP (DHCP) is
selected, the other fields here will be grayed out.
Please allow about 2 minutes for the DHCP client
to be functional once this selection is made.
IP Address:
The default IP address is 192.168.0.50. Assign a
static IP address that is within the IP address range
of your network.
Subnet Mask:
Enter the subnet mask. All devices in the network
must share the same subnet mask.
Default Gateway: Enter the IP address of the gateway/router in your
network.
DNS:
Enter a DNS server IP address. This is usually the
local IP address of your gateway/router.

LAN

35