Wlan Partition - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
In this window, users can view and configure the WLAN partition settings. After the configuration, click the Save button to accept the changes
made.
Wireless Band: Select the wireless band used here. Options to
choose from are 2.4 GHz and 5 GHz.
Link Integrity: Select to Enable or Disable the link integrity
feature here. If the Ethernet connection between
the LAN and the AP is disconnected, enabling this
feature will cause the wireless segment associated
with the AP to be disassociated from the AP.
Ethernet to WLAN Select to Enable or Disable the Ethernet to WLAN
Access:
access feature here. When disabled, all data from
the Ethernet to associated wireless devices will be
blocked. Wireless devices can still send data to the
Ethernet.
Internal Station
The default value is Enable, which allows stations
Connection:
to intercommunicate by connecting to a target AP.
When disabled, wireless stations cannot exchange
data on the same Multi-SSID. In Guest mode,
wireless stations cannot exchange data with any
station on your network.

WLAN Partition

77