Traffic Control; Uplink/Downlink Settings - D-Link DAP-2660 User Manual

D-Link DAP-2660 User Manual
The uplink/downlink settings allows users to customize the uplink and downlink interfaces including specifying uplink/downlink bandwidth
rates in Mbits per second. These values are also used in the QoS and Traffic Manager windows. Once the desired uplink and downlink settings are
finished, click the Save button accept the changes made.
Downlink: Select this checkbox to configur the download
settings.
Uplink: Select this checkbox to configure the uplink
settings.
2.4GHz: Select this tab to configure the downlink/uplink
settings for the 2.4GHz wireless band.
5GHz: Select this tab to configure the downlink/uplink
settings for the 5GHz wireless band.
Downlink Interface: Select the downlink interface(s) that will be
configured here.
Uplink Interface: Select the uplink interface(s) that will be
configured here.
Downlink Bandwidth Enter the downlink bandwidth value here. This
(1~300): value must be between 1 and 300 Mbps. By
default, this value is 100 Mbps.
Uplink Bandwidth Enter the uplink bandwidth value here. This value
(1~300): must be between 1 and 300 Mbps. By default, this
value is 100 Mbps.

Traffic Control

Uplink/Downlink Settings

78