D-Link DAP-2660 User Manual page 13

Airpremier wireless ac1200 concurrent dual band poe access point

Hide thumbs Also See for DAP-2660:

Table of Contents

D-Link DAP-2660 User Manual

Auto Channel

Select to Enable or Disable the auto-channel selection feature here. When enabled, the access point automatically selects the

Selection:

channel that provides the best wireless performance. The channel selection process only occurs when the AP is booting up. To

manually select a channel, set this option to Disable and select a channel from the drop-down menu.

Channel:

To change the channel, first toggle the Auto Channel Selection setting to Disable, and then use the drop-down menu to make

the desired selection.

Note: The wireless adapters will automatically scan and match the wireless settings.

Channel Width:

Select the wireless channel width option here. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40

MHz allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on your network.

Captive Profile:

Select to Enable or Disable the captive profile feature here.

Table of Contents

Airpremier dap-2660