Wi-Fi Configuration - iOptron AZ Mount Pro Instruction Manual

This procedure only needs to be performed once unless you have changed your AZMP Wi-Fi
settings.
Then click on the Scope icon and tap on Connect to connect the mount. Now you can perform
GOTO and Slew from your SmartPhone/Tablet.

6.3. Wi-Fi Configuration

The AZMP Wi-Fi is shipped with no password protection. You can change the SSID and enable
password protection so only you can make the connection.
To change the Wi-Fi settings:

Connect the computer/tablet/SmartPhone to AZMP Wi-Fi;

Open the internet browser and type in

A login window will open. Enter "admin" as both User Name and Password;

Go to AP Settings;

Now you can change the SSID name from AZMP_XXXXXX to Your Name, enable WPA2
encryption, etc.;

You may also go to account to change login name and password;

Restart the mount.
Note:
1. Please keep the Wi-Fi at AP (access point) mode, unless you know how to setup the ST
mode.
2. If ever you forgot your password, use the hand controller "Restore to Factory" to reset the
WI-FI adapter to factory default settings.
Figure 17 Using Sky Safari on a SmartPhone/Tablet
http://10.10.100.254
;
29