Hsci Control Components - HEIDENHAIN MANUALplus 620 Manual

HSCI control components

Main computer
Main computer The MC 7410 T main computer consists of:
•
Intel Celeron 1047 processor (1.4 GHz, dual-core)
•
2 GB SDRAM main memory
•
MANUALplus operating panel with soft keys
•
12.1-inch TFT color flat-panel display; resolution:
1024 x 768 pixels
•
HSCI interface to the controller unit and to other control
components
•
USB port with cover cap on front
•
Further interfaces for use by the end user: Ethernet, USB 3.0,
RS-232-C/V.24, connection to PROFINET-IO or PROFIBUS-DP
through additional module
To be ordered separately, and installed in the main computer by
the OEM:
•
CFR memory card with the NC software
•
The System Identification Key component(SIK) holds the NC
software license for enabling control loops and software options.
The following HSCI components are necessary for operation of
the MANUALplus 620:
•
MC main computer
•
Controller unit
•
PLC I/O unit PLB 62xx (system PL; integrated in UEC)
•
MB 720 T machine operating panel or PLB 6001 HSCI adapter
for connection of an OEM machine operating panel
Voltage supply DC 24 V of power are supplied to the main computer and other
HSCI components by the PSL 13x supply unit. For the entire
HSCI system, the DC 24 V NC supply voltage for the control
components must be safely separated voltage (PELV). It must not
be connected to the DC 24 V supply voltage for PLC components
(e. g. holding brakes).
Export version Because the complete NC software is saved on the CFR memory
medium, no export version is required for the main computer
itself.
Versions The MC 7410 T main computer is designed for direct installation
in the operating panel. It combines the 12.1-inch screen and the
control keyboard in one extremely compact unit. The MC 7410 T
main computer is supported starting with NC software 54843x-02.
MC 7410 T
16
Keyboard Power loss Mass
Integrated 43 W 5.6 kg ID 1034791-xx
MC 7410 T