DEC MicroVAX 3100 85 Troubleshooting Instructions page 21

Figure 1-1 (Cont.) Diagnostic Tests
AO User defined scripts
Al Powerup tests, Functional Verify, continue on error, numeric countdown
A3 Functional Verify, stop on error, test
#
announcements
A4 Loop on A3 Functional Verify
A6 Memory tests, mark only multiple bit errors
A7 Memory tests
AS Memory acceptance tests, mark single and multi-bit errors, call A7
A9 Memory tests, stop on error
B2 Extended tests plus BF, then loop
B5 Extended tests, then loop
BF DZ, SYNC, ASYNC with loopbacks
Load & start system exerciser
100 Customer mode, 2 passes
101 CSSE mode, 2 passes
102 CSSE mode, continous until AC
103 Manuf mode, continous until AC
104 Manuf TINA mode, continous until AC
105 Manuf mode, 2 passes
106 CSSE mode, select tests, continous until AC
107 Manuf mode, select tests, continous until AC
Note
Tests 101 through 107 are reserved for use by Digital services.
The tests and utilities shown in Table 1-2 are for option cards, which mayor may
not be present, depending upon the options you ordered.
Table 1-2 Option Card Tests
Test
E8
E9
EC
FO
Fl
F2
Name
SYNC
SYNC_Utility
ASYNC
SCSCoption
SCSI_ Opt_Utili ty
SCSCMAP _Option
Usage
Synchronous COMM option card (DSW41142)
Synchronous COMM option card (DSW41142)
Asynchronous option card (DHW41/42)
SCSI option card for 2nd SCSI bus B (KZDDA)
SCSI option card for 2nd SCSI bus B (KZDDA)
SCSI option card for 2nd SCSI bus B (KZDDA)
Troubleshooting and Diagnosing Problems 1-15