Table of Contents
Advertisement
Table 1-1 (Cont.) Basic Troubleshooting
Symptom
Possible Cause
RRD43 Compact Disc Drive Problems
The drive does not
accept the disc.
The eject button fails to
release the disc tray.
The disc is upside-down
in the tray or it is not
placed correctly in the
tray.
A disc is already
present.
The eject button is
disabled by software.
The system does not
have power.
The RRD43 compact disc
drive is faulty.
Suggested Solution
Remove the disc from the tray and
reinsert it properly.
Remove the disc and replace it
with a new one.
Reenable the eject button or
manually release the disc tray.
Set the system unit on/off switch to
the on ( I ) position and press the
eject button again.
If you want to release the disc
tray manually, see MicroVAX 3100
Model
85/95
Operator Information
for instructions. If the problem
persists, contact your Digital
services representative.
(continued on next page)
Troubleshooting and Diagnosing Problems 1-5
Advertisement
Chapters
Table of Contents
