Advertisement
ple, extended wireless communications has an impact
on battery life. To conserve battery power, the integrat-
ed 802.11b radio (WLAN) has the capability to reduce
power consumption when wireless communications is
not in use.
To check the battery power:
1.
Power on the iPAQ by pressing and releasing the power
button.
2.
Tap
3.
Select Settings.
4.
Select System from the bottom of the Settings screen.
5.
Scroll the screen, if necessary, and select the Power icon
to display the Power screen
When the iPAQ battery charges, the main battery "power
remaining" status bar continuously updates until the iPAQ battery
is fully charged (100%). If the SPS 3000 is connected, and its
battery is low, the external battery "power remaining" status bar
S P S
S C A N / L A N
to display the Start screen.
3 0 0 0
.
iPAQ Battery Status Bar
SPS 3000 Battery Status Bar
6
Advertisement
